MXQ Progressive Cavity Pumps
MXQ Progressive Cavity Pumps
MXQ progressive cavity pumps are self-priming, positive displacement pumps, which are used for pumping a wide range of liquids including highly viscous, aggressive fluids with entrapped air, or neutral fluids, or fluids with fiber and solid content. Our pump designs are designed for low to high flow applications, with various pressure handling requirements.
MXQ progressive cavity pumps consist of two parts; the rotating eccentric screw and the stationary stator. The rotor conveys the medium with low pulsation and vibration through the stator. The pump materials of construction will be based upon the application.
Design:
The following are salient innovative design features of the MXQ progressive cavity pump
- Elongated Profile Rotor and Stator: The overall diameter of the rotor and stator is decreased, whereas the pitch is increased. The performance and shelf life of the progressive cavity pump depends on the surface speed at the periphery of the rotor against the stator. This speed is termed as rubbing velocity, which can minimize the life expectancy of the pump’s rotor and stator. All MXQ progressive cavity pumps are designed to have low rubbing velocities, which has improved their life by 40% than standard pumps available in the market.
The elongated profiles have helped minimize thrust loads on the bearings and joints, reduce starting torque requirements, as well as shearing on the load.
- Universal Cardan Joint (3-year Warranty): During the operation, the progressive cavity pump’s rotor has three different centers of rotation. As the centerline of the rotor is offset from the centerline of the drive shaft, a drive connection cannot be made easily. This type of connection is established using a flexible type drive. In many progressive pump designs, this flexibility is achieved using a pin joint or a gear joint. However, in MXQ progressive cavity pumps, the hollow shaft utilizes the Universal-Cardan joint design. This joint helps minimize the dependence on hollow tube configuration, improves angularity, as well as reduces the required length of connecting rods.
Universal joint used in MXQ progressive cavity pumps is lubricated with synthetic temperature stable lubricant, and is offered with a 3-year warranty.
PERFORMANCE:
- Capacity up to 1,400 gpm
- Differential pressure up to 360 psi
- 1 stage: 90 psi
- 2 stages: 180 psi
- 4 stages: 360 psi
- Operating temperature up to 356° F
- Viscosity up to 1,000,000 cS
APPLICATIONS:
- Wastewater
- Paper
- Paint
- Crude Oil
- Food/Beverage Waste
- Asphalt
- Chemical Injection
- Slurry
- Drilling Fluids
- Ballast Water
- Calcium Carbonate
- Tall Oil
EH - OUR MOST PREMIUM PROGRESSIVE CAVITY PUMP
FEATURES:
- Elongated Profile
- Standard Cardan Joints
- Best used for pumping viscous media
EL - OUR SPACE SAVING DESIGN
FEATURES:
- Compact design
- Eliminates need for base plate
ER - OPEN HOPPER PUMP
FEATURES:
- Open suction hopper design
- For highly viscous sludge/slurry
- Can pump up to 60% solids
