Facebook Twitter Linkedin Youtube

Chempump

REQUEST A QUOTE

NC Series

The NC series pump is the only encapsulated pump that meets both industry specifications for pumps without mechanical seals:

  • ASME B73.3M Specification for Centrifugal Pumps without Mechanical Seals with Horizontal Suction for Chemical Processes.

  • The specification for pumps without mechanical seals ANSI/HI-5.1-5.6. of the Hydraulic Institute.

Diagnostic Monitor that Predicts and Prevents – The patented IntelliSenseTM diagnostic monitor comes standard, which provides both bearing wear indications and real-time monitoring of the rotating assembly. This monitoring capability will assist the operator in predicting wear patterns based on current system conditions. Through proper use of our monitor, pump failures should become an expense of the past.

AVAILABLE IN UTAH & SELECT COUNTIES IN NEVADA

NC-Series
Leak-proof Design – NC Series pumps are not just sealless, but also offer a secondary level of containment where, in the unlikely event of a catastrophic failure, all pumped fluid will remain in your system.
High Efficiency Motors – This high efficiency design allows the use of thicker primary containment, adding more margin for containment and without loss of efficiency.
Minimal Spare Parts – NC Series pumps use fewer components than sealed and magnetically coupled pumps. The post-removal design is standard and allows quick and easy replacement of all wear parts without removing the pump casing from the pipeline.

Dynapump LE Series

ANSI PUMPS REDEFINED: The Dynapump LE pump is an ANSI style process pump. The LE pump is designed to replace a single seal ANSI pump. Price point is the same or lower than ANSI singular stamp pumps. The delivery times make the pumps more attractive, as the normal delivery time is 2-3 weeks. If you have an ANSI application – this should be the pump you use

There is no reason to specify anything else for your ANSI pumping application.  

Meets ANSI/ASME B73.3M – No modification necessary to piping, foundation or electrical switchgear.

Bearing Wear Detector – Powerful diagnostic tool, allowing users to perform basic maintenance before any damage occurs.

100% Leak Proof – Completely eliminates dangerous emissions and costly leaks.

Dynapump LE Series

Design – Keeps bearings at a lower temperature — Which mitigates service frequency.

Double Containment – Outperforms magnetic drive pumps.

Short delivery time – Completely eliminates long delivery delays.

Dynapump JS & PT Series

Chempump’s Dynapump series of canned motor pumps are designed and constructed to provide maximum reliability, design simplicity and sealless performance at a relatively low cost.
Dynapump canned motor pumps range from fractional to 5 horsepower units designed for sealless handling of a wide range of corrosive, volatile, expensive and other hard to handle fluids. Dynapumps are ideally suited for OEM applications where leak free circulation of high value fluids is critical to system performance.
Simplicity? That’s the word for Dynapump.
Simple because the pump and motor are combined into one hermetically sealed unit, preventing fluids from leaking out or contaminates from seeping in. Dynapumps have no dynamic seals and require no external lubrication.
Simple because the Dynapump incorporates only one moving part and eliminates the need for alignment. Maintenance on seals is eliminated and overall maintenance is reduced.
Dynapump JS & PT Series
The lightweight Dynapump permits installation directly in the pipeline and requires no special foundations, costly leveling or alignment.
The Dynapump line is economical and competitive with centrifugal pumps using mechanical seals. Chempump’s Dynapump line will deliver dependable, leakproof pumping at an economical price.

G Series

Teikoku USA’s Chempump brand G Series canned motor pumps have been the workhorse of the North American sealless pump industry for over 50 years. G Series pumps feature automatic hydraulic thrust balance, replaceable thrust surface designs, direction of rotation indication and precision front and rear bearings.

G Series Chempump products are capable of pumping liquid from -400ºF to 1000ºF and working pressures up to 5000 psi. As with all Chempump products, no special tools, foundations, leveling or alignment are required for installation.

Since becoming part of the Teikoku range of products in 2003, the G Series Chempump range has been optimized for smaller, more efficient sealless pump solutions up to 50 HP and all available with Teikoku’s patented Teikoku Rotary Guardian (TRGTM) bearing wear monitor.

G Series

Optional features include:

  • TRGTM Bearing Wear Monitor
  • Leak-proof Junction Box
  • Hardened bearings and journals
  • Circulation modifications to ASME/ANSI B73.3 and API 685 criteria
  • NPSHR Inducers
  • Solids Handling
  • North American NRTL Explosion Proof Motors for both Division 1 and Division 2
  • HAZLOC suitability
  • Dry or solid filled secondary containment stators

Special applications include:

  • Submerged designs
  • Highly Toxic Service
  • Slurry Service
  • ASME Nuclear Designs and Certifications
  • Canned Motor Drives
  • Hybrid designs featuring specialty Teikoku motors for high temperature or high speed service

Chem/Meter Pump

Since 1963, Chem/Meter pumps have been providing metering pump users with highly accurate, responsive and sealless solutions to the industry’s most demanding process and OEM applications. Designed in response to the users’ needs for a higher degree of reliability, Chem/Meter delivers these solutions in highly engineered or off-the-shelf packages that incorporate the latest in electronic automated flow control, leak detection and modular steady flow performance.
Chem/Meter delivers Performance under pressure.
Chem/Meter offers a complete line of diaphragm metering pumps covering a full hydraulic performance envelope, a wide range of liquid end styles and materials of construction enabling the injection of virtually any liquid and a complete set of options to accommodate any external process condition or automation requirement.
Chem-Meter Pump
Today, Chem/Meter is the only manufacturer to have achieved the quality necessary to meet the demanding ASME N-Stamp certification for nuclear service. This level of Quality is incorporated throughout the Chem/Meter range, and is thereby offered with an industry leading two-year warranty.

Related ProductS

TYPE F-V

Teikoku

VIEW PRODUCT